kinematics of machinery Posts

Read
Write

2

votes

0

answers

1.1k

views

0

answers

A wheel of mass 30 kg is pulled horizontally with a force of 100 N applied through a cord wrapped around inner drum of wheel as shown in the figure.

kinematics of machinery updated 22 months ago by sagarkolekar ★ 11k

2

votes

0

answers

4.6k

views

0

answers

Derive the condition for transmitting the maximum power in a flat belt drive and find the velocity of the belt for the maximum power.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

3

votes

0

answers

3.5k

views

0

answers

The annulus A in the gear train shown in figure rotates at 300 rpm about the axis of the fixed wheel S which has 80 teeth.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

1.3k

views

0

answers

What is fundamental equation of steering gears? Which steering gears fulfill this condition?

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

1

vote

0

answers

2.1k

views

0

answers

State and explain Kennedy's theorem.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

1.1k

views

0

answers

Define base circle, pitch circle, trace point, pitch curve and pressure angle.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

388

views

0

answers

What is self-locking and self-energised brakes?

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

416

views

0

answers

Explain self-locking and self-energising brakes?

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

528

views

0

answers

With neat sketch explain he fundamental equation of steering gears for correct gearing.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

1

vote

0

answers

2.0k

views

0

answers

What are rigid and resistant bodies? Elaborate.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

1

vote

0

answers

748

views

0

answers

Explain with neat sketch the watt's linkage for generating approximate straight line.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

3

votes

0

answers

2.1k

views

0

answers

A CAM is to give following motion to knife-edge follows:

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

411

views

0

answers

State and derive law of gearing.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

1.1k

views

0

answers

Use following data of a cam in which a knief-edge follower is raised with uniform acceleration and deceleration and is lowered with simple harmonic motion:

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

2.8k

views

0

answers

An open belt drive is required to transmit 10 kW of power from a motor running at 600 rpm. Diameter of driving pulley is 250 mm.The speed of driven pulley is 220 rpm.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

1.4k

views

0

answers

What is the effect of centrifugal tension on power transmitted in belt drive?

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

402

views

0

answers

State and explain law of belting?

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

2

votes

0

answers

1.5k

views

0

answers

In an open belt drive,the diameter of longer and smaller are 1.2 m and 0.8 m respectively. The smaller pulley rotates at 320 rpm. The center distance between the shaft is 4 m.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

2.1k

views

0

answers

Explain chordal action in chain drive.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

1.4k

views

0

answers

What is Degree of freedom (DOF) of plane mechanism? Find DOF of single-slider crank mechanism using Kutzbach criteria.

kinematics of machinery updated 2.1 years ago by sagarkolekar ★ 11k

0

votes

0

answers

8.0k

views

0

answers

A pinion of 120 mm pitch circle diameter and having 20 involute teeth drives a rack. The addendum of both the pinion and rack is 6 mm.

kinematics of machinery updated 2.1 years ago by RakeshBhuse • 3.2k

0

votes

0

answers

712

views

0

answers

Two 20$^{\circ}$ involute spur gear have a module of 10 mm. The addendum is one module. The large gear has 50 teeth and pinion has 13 teeth. Does interference occur?

kinematics of machinery updated 2.1 years ago by RakeshBhuse • 3.2k

0

votes

0

answers

264

views

0

answers

Kinematics Of Machinery

kinematics of machinery updated 2.2 years ago by uppadaaru876 • 20

0

votes

0

answers

556

views

0

answers

Two mating involute spur gears of 200 pressure angle have a gear ratio 2. The number of teeth on pinion is 20 and its speed is 250 rpm. The module pitch of the teeth is 12 mm. If the addendum on eac

kinematics of machinery updated 2.3 years ago by mdrizwanshaik562 • 20

2

votes

0

answers

2.2k

views

0

answers

A toggle mechanism shown in the figure. Find the velocities of the slider by:

kinematics of machinery updated 2.4 years ago by teamques10 ★ 65k

<prev • 26 results • page 1 of 2 • next >